marine base.

$259.99

A highly durable, incredibly glossy protective coating designed to reduce maintenance for all painted, gelcoat, metal and plastic surfaces on your boat. Our marine base. is the foundation to our two-layer system designed to enrich or restore the appearance and protect your boat for 18 – 24 months. Preventative, proactive and rich in shine, this coating gives new life to your boat.

81 in stock

Description

A highly durable, incredibly glossy protective coating designed to reduce maintenance for all painted, gelcoat, metal and plastic surfaces on your boat. Our marine base. is the foundation to our two-layer system designed to enrich or restore the appearance and protect your boat for 18 – 24 months. Preventative, proactive and rich in shine, this coating gives new life to your boat.

It protects your vessel against environmental damages such as bugs, bird droppings, heavy detergents, sun damage, oxidation, minor scuff transfer, dirt, grime, marine growth and more. With hydrophobic self-cleaning and protective properties, cleaning is simple. Your boat, new or old, can be transformed, and we want to help. marine base. is the very best primary coat for our marine top. where you can achieve a final protective layer for extra hydrophobic properties and gloss.

Coverage: One bottle will cover 24 ft. boats an average of 1-2 times. This means up to two layers for the average 24 – 30 ft boat. For best results, aim to apply two layers of marine base.

Additional information

Weight0.0 oz
Dimensions0.0 × 0.0 × 0.0 in

Instructions

At undrdog, we want your boat to look it’s very best for as long as you want it. So we want you to have every tool and resource to get your car coated with expert care. We will walk you through it.

What you need to get started:

  1. Brand new microfiber towels (at least 3)
  2. Applicator pads
  3. Wax and grease remover (alcohol and water solution)
  4. Bottle of marine base.
  5. Our undrdog soap. or other safe degreasing soap like Dawn
  6. Adequate lighting
  7. Timer

Application instructions:

To prepare your boat, ensure it is washed with a reliable soap and the contamination is removed (polish if needed). For coating see instructions below:

  1. Remove wax and grease (An alcohol and water solution is excellent at the removal of all residue, wax and grease).
  2. After prepping your boat, start a timer for 5 – 7 minutes. 
  3. Prime your applicator pad by dripping 10 – 15 drops of marine base. onto the pad, or until damp but not wet. Throughout the entire coating process, make sure to keep your applicator pad damp by continually adding marine base. to the pad, as needed, to maintain an even coating. 
  4. To begin, apply marine base. evenly to one 3×3 ft section.
  5. Apply one section at a time in a cross-hatch motion. This means applying the applicator pad in a vertical and then horizontal wiping motion to ensure complete coverage of each panel before moving to the next.
  6. Complete as many 3×3 sections as possible in 5 – 7 minute intervals. Finish coating your final section before the timer goes off. 
  7. Once the timer goes off, take three clean microfiber towels and, starting with the first section you coated, use one towel to wipe off the marine base. solution; One to buff off the remaining residue; One as a final wipe down.
  8. Repeat step 7 for every section, using the same towel for each step. Always check for any missed residue or dark spots.
  9. Repeat steps 1 – 7 until the entire boat is coated, wiped and buffed.
  10. Once you have coated the full boat, wait one hour and repeat steps 1- 8 to add another layer.

After one hour:

Follow instructions to add a layer of marine top. for 18-24 months of protection.

Drying time and immediate after care:

Once you are done applying every layer of your ceramic coating (marine base. and marine top.) wait three hours for it to completely dry. Wait 24 hours before getting your car wet. Do not wash with detergents for 1 week. Dry off your car with clean microfiber towels for the first week whenever your car gets wet. Once a full week is up, use a PH balanced soap for striping dirt and grime that could block the coatings hydrophobic value. Our undrdog soap. is perfectly compatible with ceramic coatings.

Important:

Always throw away your microfiber towels after using them for a ceramic coating. 

For best results:

Aim to coat in a cool shaded area but you can apply marine base in the direct sun too! Make sure your environment temperature is 45° – 110° F. Keep your area contamination free.

Ingredients and Safety

ingredients.

Silicone oligomer: Resin; Aluminum chelate compound: Catalyst

warning!

H226: Flammable liquid and vapour. H302: Harmful if swallowed. H319: Causes serious eye irritation. H315: Causes skin irritation. H336: May cause drowsiness or dizziness.

If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat/sparks/open flames/hot surfaces. No smoking. Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. Use personal protective equipment as required. Dispose of contents/container to comply with local, state and federal regulations. 

First Aid: IF SWALLOWED, Immediately call a POISON CENTER or doctor/ physician. Do NOT induce vomiting. IF IN EYES, Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. In Case of Fire: Use dry sand, dry chemical or alcohol-resistant foam for extinction.

marine base.
$259.99