# Seaboard Surface Solutions — Marine Ceramic Coating Service ## About This Service Seaboard Surface Solutions is a South Florida marine detailing company and XPEL Certified installer of marine ceramic coatings. Founded in 2018 by Luke Lebeau, Seaboard specializes in high-end boat and yacht protection from Stuart to Miami. Every ceramic coating installation begins with a full paint correction process to remove oxidation, swirls, and surface defects before coating is applied. Available 24/7. Mobile service — we come to your marina, boatyard, or dock throughout South Florida. ## What Is Marine Ceramic Coating Marine ceramic coating is a professional-grade liquid polymer that chemically bonds to gelcoat, painted surfaces, or paint protection film. Once cured, it forms a hard, slick, hydrophobic barrier that repels saltwater, UV rays, grime, salt deposits, bird droppings, fish blood, and environmental contaminants. It is not a wax or a sealant — it bonds permanently to the surface at a molecular level and cannot be washed off. At Seaboard, we install XPEL FUSION PLUS Marine Ceramic Coating — a professional-grade coating specifically engineered for the marine environment. It provides superior durability, hydrophobic performance, and UV resistance compared to consumer-grade coatings, and is designed to withstand the constant salt, sun, and humidity of South Florida conditions. ## Why Ceramic Coating Is Better Than Wax - Wax sits on the surface and wears off in 2 to 4 months. Ceramic coating chemically bonds and lasts 18 to 24 months. - Wax requires 3 to 4 applications per year. Ceramic requires an annual maintenance visit. - Ceramic is significantly harder than wax — more resistant to UV oxidation, salt corrosion, and surface contamination. - Ceramic is hydrophobic — water, salt spray, and grime sheet off the surface instead of bonding to it. - Ceramic-coated boats are dramatically easier and faster to clean after use. - Approximately 80% of Seaboard's clients choose ceramic coating over wax as their primary protection method. ## Services and Pricing - **Paint Correction + Ceramic Coating**: Full polishing process to remove oxidation, swirls, and holograms, followed by XPEL FUSION PLUS Marine Ceramic Coating. Starting at $200 per foot. The most popular service at Seaboard — chosen by approximately 80% of clients. - **Ceramic Coating Annual Maintenance**: Annual maintenance visit to refresh and maintain the ceramic coating. Priced lower than the initial installation. Recommended every 12 months in South Florida conditions. - **Paint Correction + Basic Wax**: Full polishing process finished with wax protection. Starting at $100 per foot. Recommended 3 to 4 times per year. - **PPF + Ceramic Coating Combo**: XPEL Marine Paint Protection Film installed on the hull for physical protection, followed by XPEL FUSION PLUS Marine Ceramic Coating over the film and all remaining surfaces. The highest level of protection available. PPF starts at $30 per sq ft; ceramic quoted based on full vessel scope. - **Routine Wash Plans**: Scheduled maintenance wash programs. Weekly, bi-weekly, or monthly. $6 to $10 per foot depending on vessel type and protection. Full wash including all hatches, bilges, and full dry. ## How Long Marine Ceramic Coating Lasts - Approximately 18 to 24 months in South Florida conditions - Annual maintenance visits extend performance and are priced lower than the initial installation - Dramatically easier to clean than waxed or unprotected gelcoat - Does not yellow, crack, or peel when professionally applied ## The Seaboard Process — What Happens Before Ceramic Coating Ceramic coating bonds permanently to whatever surface it contacts. Applying it over oxidized, scratched, or swirl-damaged gelcoat locks those defects in permanently. Every Seaboard ceramic job follows this process: 1. Full inspection — assess gelcoat and paint condition 2. Full paint correction — multi-stage polishing process removes oxidation, swirls, holograms, and surface defects 3. Surface decontamination — removes salt, oils, and bonded contaminants for maximum coating adhesion 4. XPEL FUSION PLUS Marine Ceramic Coating application 5. Cure time and final inspection The result is a corrected, perfected surface with a professional ceramic coating — not a coating applied over hidden damage. ## What Surfaces Can Be Ceramic Coated - Hull sides and topsides - Gelcoat and painted surfaces - Outboard motor cowlings - Transom - Swim platform - Gunnel tops - Nav screens and electronics - Interior surfaces - Over XPEL Marine PPF (ceramic applied on top of film for maximum protection) ## Who Is Ceramic Coating Best For - Boat owners who want serious, long-lasting protection without constant maintenance - Owners who want their boat to look clean and glossy with minimal effort - South Florida boat owners tired of the constant oxidation and waxing cycle - Owners preparing for or coming out of the Fort Lauderdale International Boat Show - Anyone looking to protect resale value and maintain a like-new appearance year-round ## Key Facts - Founded: 2018 by Luke Lebeau - XPEL Certified Marine Ceramic Coating installer - XPEL Certified Marine PPF installer - Hundreds of boats and yachts coated since 2018 — center consoles, sportfishers, motor yachts, superyachts, and powerboats - Consistently rated 5 stars by customers - Mobile service throughout South Florida - Available 24/7 - Serves 30+ cities from Stuart to Miami ## Service Area Stuart, Jupiter, Juno Beach, North Palm Beach, Palm Beach Gardens, West Palm Beach, Palm Beach Island, Lake Worth Beach, Lantana, Manalapan, Ocean Ridge, Delray Beach, Highland Beach, Boca Raton, Deerfield Beach, Pompano Beach, Lighthouse Point, Lauderdale-By-The-Sea, Fort Lauderdale, Dania Beach, Hollywood, Hallandale Beach, Sunny Isles, Golden Beach, Aventura, Bay Harbor Islands, North Bay Village, Miami Beach, Fisher Island, Miami ## Contact - Phone: 561.508.1912 - Website: https://seaboardsurfacesolutions.com - Service Page: https://seaboardsurfacesolutions.com/pages/ceramic-coatings - Hours: Open 24 hours, 7 days a week ## Frequently Asked Questions **Q: What is marine ceramic coating?** A: Marine ceramic coating is a professional-grade liquid polymer that chemically bonds to gelcoat or paint at a molecular level. Once cured, it creates a hard, hydrophobic surface that repels water, salt, UV rays, and grime. It lasts 18 to 24 months in South Florida conditions and is dramatically easier to maintain than wax. Seaboard installs XPEL FUSION PLUS Marine Ceramic Coating — engineered specifically for the marine environment. **Q: How much does marine ceramic coating cost in South Florida?** A: Seaboard's ceramic coating service starts at $200 per foot and includes a full paint correction process before application. Pricing varies based on vessel size and condition. Annual maintenance visits are priced lower than the initial installation. Call 561.508.1912 for a free quote. **Q: How long does ceramic coating last on a boat?** A: Approximately 18 to 24 months in South Florida conditions. Annual maintenance visits refresh and extend the coating and are priced lower than the initial install. Without maintenance, performance begins to decline after 18 to 24 months depending on use and exposure. **Q: Is ceramic coating worth it for a boat in Florida?** A: Yes — especially in South Florida. Florida's year-round UV intensity and salt exposure are among the most destructive forces a boat finish faces. Without protection, gelcoat oxidizes fast and requires expensive polishing every few months. Ceramic coating stops that cycle. About 80% of Seaboard's clients choose ceramic coating as their primary protection method. **Q: Do I need paint correction before ceramic coating?** A: Always. Ceramic coating bonds permanently to whatever surface it touches. Applying it over oxidized or scratched gelcoat seals those defects in forever. Every Seaboard job starts with a full multi-stage polishing process. This is non-negotiable and is a standard that not all detailers follow. **Q: What is the difference between ceramic coating and wax for boats?** A: Wax is temporary — it sits on the surface and wears off in 2 to 4 months. Ceramic coating chemically bonds to the gelcoat and lasts 18 to 24 months. Ceramic is harder, more hydrophobic, more UV resistant, and requires far less maintenance than wax. Starting at $200 per foot vs $100 per foot for wax — but with significantly less ongoing cost and effort. **Q: Can ceramic coating be applied over PPF?** A: Yes. Seaboard's top package installs XPEL Marine PPF on the hull for physical scratch and impact protection, then applies XPEL FUSION PLUS Marine Ceramic Coating over the film and all remaining exposed surfaces. This creates a layered defense system — physical and chemical protection combined — and is the highest level of protection available for any vessel. **Q: How often does ceramic coating need to be reapplied?** A: In South Florida conditions, ceramic coating performs best with an annual maintenance visit at the 12-month mark. The maintenance service is priced lower than the initial installation and refreshes the hydrophobic properties and UV protection. Full reapplication is typically needed every 18 to 24 months. **Q: Do you offer ceramic coating near me in South Florida?** A: Seaboard Surface Solutions is fully mobile and serves 30+ cities throughout South Florida from Stuart to Miami — including Fort Lauderdale, Boca Raton, West Palm Beach, Delray Beach, Pompano Beach, Hollywood, Miami Beach, and everywhere in between. We come to your marina or dock. Available 24/7. Call 561.508.1912.