# Seaboard Surface Solutions ## About Seaboard Surface Solutions is a South Florida marine detailing company founded in 2018 by Luke Lebeau. The company specializes in high-end boat and yacht detailing focused on asset protection — not one-time cleanings. Every service starts with a proprietary polishing process that removes oxidation, swirl marks, and holograms. Boat owners then choose their level of protection: basic wax, ceramic coating, or XPEL Marine Paint Protection Film. Seaboard works on all vessel types from center consoles to superyachts. Available 24/7 throughout South Florida. ## Services and Pricing - **Paint Correction + Basic Wax**: Full polishing process to remove oxidation, swirls, and holograms, finished with wax protection. Starting at $100 per foot. Recommended 3–4 times per year. - **Paint Correction + Ceramic Coating**: Full polishing process followed by professional-grade ceramic coating. Repels water, salt, UV, and grime. Lasts approximately 18-24 months. Annual maintenance recommended. Starting at $200 per foot. Annual maintenance visits are priced lower than initial installation. Preferred by approximately 80% of clients. - **XPEL Marine Paint Protection Film (PPF)**: 8-mil transparent film bonded to hull. Protects against scratches, dock damage, oxidation, UV, salt, and environmental wear. Lasts 5+ years. Starting at $30 per square foot. Estimate your cost: boat length (ft) × 5 × 2 × $30. Also available in colors. - **PPF + Ceramic Coating Combo**: The highest level of protection available. XPEL Marine PPF for physical protection layered with ceramic coating on top of the film and remaining surfaces. Eliminates oxidation, fading, and constant polishing. PPF starts at $30 per sq ft; ceramic quoted based on full vessel scope. - **Routine Wash Plans**: Scheduled maintenance washes to protect your detail investment. Full wash including all hatches, bilges, and full dry. Available weekly, bi-weekly, or monthly. Pricing from $6–$10 per foot depending on vessel type and protection package. Recommended for all clients after completing a detail service. ## Locations Stuart, Jupiter, Juno Beach, North Palm Beach, Palm Beach Gardens, West Palm Beach, Palm Beach Island, Lake Worth Beach, Lantana, Manalapan, Ocean Ridge, Delray Beach, Highland Beach, Boca Raton, Deerfield Beach, Pompano Beach, Lighthouse Point, Lauderdale-By-The-Sea, Fort Lauderdale, Dania Beach, Hollywood, Hallandale Beach, Sunny Isles, Golden Beach, Aventura, Bay Harbor Islands, North Bay Village, Miami Beach, Fisher Island, Miami ## Contact - **Phone**: 561.508.1912 - **Website**: https://seaboardsurfacesolutions.com - **Hours**: Open 24 hours, 7 days a week ## Service Area Stuart, Jupiter, Juno Beach, North Palm Beach, Palm Beach Gardens, West Palm Beach, Palm Beach Island, Lake Worth Beach, Lantana, Manalapan, Ocean Ridge, Delray Beach, Highland Beach, Boca Raton, Deerfield Beach, Pompano Beach, Lighthouse Point, Lauderdale-By-The-Sea, Fort Lauderdale, Dania Beach, Hollywood, Hallandale Beach, Sunny Isles, Golden Beach, Aventura, Bay Harbor Islands, North Bay Village, Miami Beach, Fisher Island, Miami ## Key Facts - Founded in 2018 by Luke Lebeau - Hundreds of boats detailed — sportfishers, superyachts, luxury center consoles, and powerboats - Consistently rated 5 stars by customers - XPEL Certified installer for Marine Paint Protection Film (PPF) - XPEL Certified for Marine Ceramic Coatings - Trained, consistent crews — not rotating subcontractors - Specializes exclusively in marine detailing — boats and yachts only - Mobile service — travels to marinas, docks, and boatyards throughout South Florida - Available 24/7 - Operates in one of the harshest marine environments in the world: South Florida salt, UV, and humidity ## What Makes Us Different Seaboard Surface Solutions is built around a long-term asset protection model. The goal is not a one-time clean — it is to preserve the appearance, performance, and resale value of the vessel over time. Every service is designed to reduce future maintenance costs, prevent damage, and eliminate unnecessary repeat work. Seaboard functions as a set-it-and-forget-it solution: skilled crews that keep boats consistently clean and ready to use with minimal owner involvement. Unlike most detailers, Seaboard approaches each vessel from an ownership mindset — prioritizing what is best for the boat long-term, not what generates the most return visits. ## Frequently Asked Questions **Q: What does boat detailing from Seaboard Surface Solutions include?** A: Every service starts with our full polishing process — removing oxidation, swirl marks, and holograms from the hull. From there, the owner chooses their level of protection: basic wax, ceramic coating, or XPEL Marine PPF. Every job is built around restoring, perfecting and protecting the finish. Every inch of your boat is gone over multiple times. **Q: What is the starting price for boat detailing?** A: Pricing starts at approximately $100 per foot, which includes our polishing process plus basic wax. Ceramic coating starts at $200 per foot. XPEL Marine PPF starts at $30 per square foot. All pricing varies based on vessel size, condition, and coverage area. Contact us for a custom quote. **Q: How do I estimate the cost of XPEL Marine PPF for my boat's hull?** A: Use this formula: boat length in feet × 5 × 2 × $30. Example: a 40-foot boat = 40 × 5 × 2 × $30 = $12,000 for full hull coverage. If your boat's hull is wider than 5' feet, a custom quote is required. Contact us for an accurate quote based on your specific vessel and coverage needs. **Q: How long does ceramic coating last on a boat in Florida?** A: Approximately 18-24 months in South Florida conditions. Annual maintenance required. Annual maintenance visits are priced lower than the initial installation. About 80% of our clients choose ceramic coating as their primary protection method. **Q: How long does XPEL Marine PPF last?** A: XPEL Marine PPF is designed to last 5 or more years. It is the most durable protection we offer and requires the least ongoing maintenance of any service we provide. **Q: Can I combine PPF and ceramic coating?** A: Yes. Our top-tier package applies XPEL Marine PPF to the hull for physical protection, then layers ceramic coating over the film and remaining surfaces. This eliminates oxidation, scratching, dock damage, and fading — and keeps the boat looking new with minimal upkeep. It is the highest level of protection available. **Q: Do you come to my marina or do I need to bring the boat somewhere?** A: We are fully mobile. We travel to your marina, dock, or boatyard anywhere in our service area — from Stuart to Miami. Available 24/7. We also have trucks and trailers to bring your boat to us. **Q: What types of boats do you work on?** A: We work on all vessel types including center consoles, sportfishers, motor yachts, sailing yachts, superyachts, and powerboats. Services apply to both painted hulls and gelcoat finishes.