auto top.

$109.99

A durable, hydrophobic, glossy protective coating, designed to be used on all surfaces of your vehicle, motorcycle or RV. This product can stand-alone for 18 – 24 months. When combined with auto base. it will have an even longer-lasting protection, ranging from 3.5 – 7 years. An essential next step to achieve the ultimate look and feel for all autos, old and new.

77 in stock

Description

A durable, hydrophobic, glossy protective coating, designed to be used on all surfaces of your vehicle, motorcycle or RV. This product can stand-alone for 18 – 24 months. When combined with auto base. it will have an even longer-lasting protection, ranging from 3.5 – 7 years. An essential next step to achieve the ultimate look and feel for all autos, old and new.

For the very best protection and shine, you can protect your vehicle, motorcycle, RV or truck against environmental damages caused by bugs, bird droppings, heavy detergents, sun damage, oxidation, dirt, grime and more. With hydrophobic self-cleaning and protective properties, cleaning is simple. Your car, new or old, can be transformed, and we want to help.

Coverage: One bottle will cover 2 – 3 vehicles depending on the size and amount of layers applied or about 6 full layers. This product can be used on all surfaces in and out of the vehicle.

Additional information

Weight0.0 oz
Dimensions0.0 × 0.0 × 0.0 in

Instructions

At undrdog, we want your car to look it’s very best for as long as you want it. So we want you to have every tool and resource to get your car coated with expert care. We will walk you through it.

What you need to get started:

  1. Brand new microfiber towels (at least 3)
  2. Applicator pads
  3. Wax and grease remover (alcohol and water solution)
  4. Bottle of auto top. 
  5. Adequate lighting
  6. Timer

Application Instructions:

To prepare your car, wash and remove any oxidation, staining and contamination from regular wear and tear is removed (polish if needed). If you have just finished coating your car with auto base., please make sure to wait one full hour before applying auto top. For coating see instructions below:

  1. Remove wax and grease (An alcohol and water solution is excellent at the removal of all residue, wax and grease).
  2. After prepping your car, start a timer for 5 – 7 minutes. 
  3. Prime your applicator pad by dripping 10 – 15 drops of auto top. onto the pad, or until damp but not wet. Throughout the entire coating process, make sure to keep your applicator pad damp by continually adding auto top. to the pad, as needed, to maintain an even coating. 
  4. To begin, apply auto top. evenly to one panel. We suggest starting on the roof of the vehicle and working your way to the hood and around the entire vehicle.
  5. Apply one panel at a time in a cross-hatch motion. This means applying the applicator pad in a vertical and then horizontal wiping motion to ensure complete coverage of each panel before moving to the next.
  6. Complete as many panels as possible in 5 – 7 minute intervals. Finish coating your final panel before the timer goes off. 
  7. Once the timer goes off, take three clean microfiber towels and, starting with the first panel you coated, use one towel to wipe off the auto top.; One to buff off the remaining residue; One as a final wipe down.
  8. Repeat step 7 for every panel, using the same towel for each step. Check each panel for any missed residue or dark spots.
  9. Repeat steps 1 – 7 until the entire car is coated, wiped and buffed.
  10. Once you have coated the full car, wait one hour.

Applying auto top to plastics, wheels and calipers:

One layer is sufficient for these items. See instructions below:

  1. Prime your application pad. Apply several drops of auto top. (10 – 15 drops) keeping the pad damp by re-applying as needed throughout the coating process.
  2. Apply auto top. evenly to all of the plastics, trimmings etc. Once the desired appearance is achieved do not touch for 24 hours.
  3. Apply auto top. evenly to wheels and calipers, wait 5 – 7 minutes and remove with a microfiber towel.

Drying time and immediate after care:

Once you are done applying every layer of your ceramic coating (auto top. and auto base.) wait three hours for it to completely dry. Wait 24 hours before getting your car wet. Do not wash with detergents for 1 week. Dry off your car with clean microfiber towels for the first week whenever your car gets wet. Once a full week is up, use a PH balanced soap for striping dirt and grime that could block the coatings hydrophobic value. Our undrdog soap. is perfectly compatible with ceramic coatings.

Important:

Always throw away your microfiber towels after using them for a ceramic coating.

For best results:

Aim to coat in a cool shaded area but you can apply auto top. in the direct sun too! Make sure your environment temperature is 45° – 110° F. Keep your area contamination free.

Storage:

Always store in a cool, dry location with the lid tightly closed. 

Ingredients and Safety

ingredients.

Alkyl silicone resin: Resin; Isononane: Solvent; Silicone dioxide: Hydrophobing agent.

warning!

H226: Flammable liquid and vapour. H302: Harmful if swallowed. H319: Causes serious eye irritation. H315: Causes skin irritation. H336: May cause drowsiness or dizziness. 

If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat/sparks/open flames/hot surfaces. No smoking. Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. Use personal protective equipment as required. Dispose of contents/container to comply with local, state and federal regulations. 

First Aid: IF SWALLOWED, Immediately call a POISON CENTER or doctor/ physician. Do NOT induce vomiting. IF IN EYES,  Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. In Case of Fire: Use dry sand, dry chemical or alcohol-resistant foam for extinction.

auto top.
$109.99