auto base.

$159.99

A highly durable and outrageously glossy protective coating, designed to reduce maintenance for all hard painted and plastic surfaces on your vehicle, truck, motorcycle or RV. This is the foundation coat applied in 1 or 2 layers in order to achieve 3.5 or 7 years of protection. Combined with auto top., you can get the glossiest protection available. Restorative, vibrant and brilliant in appearance, auto base. is the first step of your next auto project.

83 in stock

Description

A highly durable and outrageously glossy protective coating, designed to reduce maintenance for all hard painted and plastic surfaces on your vehicle, truck, motorcycle or RV. This is the foundation coat applied in 1 or 2 layers in order to achieve 3.5 or 7 years of protection. Combined with auto top., you can get the glossiest protection available. Restorative, vibrant and brilliant in appearance, auto base. is the first step of your next auto project.

Protect your vehicle, motorcycle, RV or truck against environmental damages caused by bugs, bird droppings, heavy detergents, sun damage, oxidation, dirt, grime and more. With hydrophobic self-cleaning and protective properties, cleaning is simple. Your car, new or old, can be transformed, and we want to help. With auto top., you can achieve a final protective layer for extra hydrophobic properties and gloss. This coating can be used on windshields, plastics, wheels and calipers.

Coverage: One bottle will cover 2 – 3 vehicles depending on the size and amount of layers applied (on average 4 – 6 full layers). This product can be used on all surfaces of the vehicle. It cannot be used on the windshield and certain fabrics.

Additional information

Weight0.0 oz
Dimensions0.0 × 0.0 × 0.0 in

Instructions

At undrdog, we want your car to look it’s very best for as long as you own it. So we want you to have every tool and resource to get your car coated with expert care. We will walk you through it.

What you need to get started:

  • Brand new microfiber towels (at least 3)
  • Applicator pads
  • Wax and grease remover (alcohol and water solution)
  • Bottle of auto base.
  • Adequate lighting
  • Timer

Application instructions:

To prepare your car, wash and remove any oxidation, staining and contamination from regular wear and tear is removed (polish if needed). For application of the coating see instructions below:

  1. Remove wax and grease (An alcohol and water solution is excellent at the removal of all residue, wax and grease).
  2. After prepping your car, start a timer for 5 – 7 minutes. 
  3. Prime your applicator pad by dripping 10 – 15 drops of auto base. onto the pad, or until damp but not wet. Throughout the entire coating process, make sure to keep your applicator pad damp by continually adding auto base. to the pad, as needed, to maintain an even coating. 
  4. To begin, apply auto base. evenly to one panel. We suggest starting on the roof of the vehicle and working your way to the hood and around the entire vehicle in order to avoid having to work over coated areas. 
  5. Apply one panel at a time in a cross-hatch motion. This means applying the applicator pad in a vertical and then horizontal wiping motion to ensure complete coverage of each panel before moving to the next.
  6. Complete as many panels as possible in 5 – 7 minute intervals. Finish coating your final panel before the timer goes off. 
  7. Once the timer goes off, take three clean microfiber towels and, starting with the first panel you coated, use one towel to wipe off the auto base.; One to buff off the remaining residue; One as a final wipe down.
  8. Repeat step 7 for every panel, using the same towel for each step. Check each panel for any missed residue or dark spots.
  9. Repeat steps 1 – 7 until the entire car is coated, wiped and buffed.
  10. Once you have coated the full car, wait one hour.

After One Hour: Follow instructions to add a layer of auto top. for 3.5 years of protection OR add another layer of auto base. (repeating steps 1-9) and then follow instructions for adding auto top. for 7 years of protection. 

Drying time and immediate after care:

Once you are done applying every layer of your ceramic coating (auto top. and auto base.) wait three hours for it to completely dry. Wait 24 hours before getting your car wet. Do not wash with detergents for 1 week. Dry off your car with clean microfiber towels for the first week whenever your car gets wet. Once a full week is up, use a PH balanced soap for striping dirt and grime that could block the coatings hydrophobic value. Our undrdog soap. is perfectly compatible with ceramic coatings.

Important:

See Instructions for applying (auto top. as a final layer and to plastics, wheels and calipers. Always throw away your microfiber towels after using them for a ceramic coating. 

For best results:

Aim to coat in a cool shaded area but you can apply auto base. in the direct sun too! Make sure your environment temperature is 45°-110° F. Keep your area contamination free.

Storage:

Store product in a cool, dry location with the lid tightly closed.  

Ingredients and Safety

ingredients.

Silicone oligomer: Resin; Aluminum chelate compound: Catalyst

warning!

H226: Flammable liquid and vapour. H302: Harmful if swallowed. H319: Causes serious eye irritation. H315: Causes skin irritation. H336: May cause drowsiness or dizziness.

If medical advice is needed, have product container or label at hand. Keep out of reach of children. Keep away from heat/sparks/open flames/hot surfaces. No smoking. Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. Use personal protective equipment as required. Dispose of contents/container to comply with local, state and federal regulations. 

First aid: IF SWALLOWED, Immediately call a POISON CENTER or doctor/ physician. Do NOT induce vomiting. IF IN EYES, Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. In case of fire: Use dry sand, dry chemical or alcohol-resistant foam for extinction.

auto base.
$159.99