Boat Bottom Painting

Antifouling Bottom Painting

Protect your boat from fouling and give it a full bottom paint makeover. Having a new bottom paint will prevent the growth of organisms that attach and stick to the hull. Other than the looks, they can impede your vessel’s speed, performance and durability, especially if the boat has been kept in water for an extended period of time.


Based on whether your boat is a brand new or already in use, the process will differ, so let’s focus on three possible scenarios and sum up the process as following:

Brand new boats without bottom paint:

  • Fresh from factory boats have a mold release wax that will need to be removed with a solvent first
  • Next step is to figure out where the boats waterline is and tape off
  • Then we sand the entire bottom for proper paint adhesion
  • Clean thoroughly and prepare for paint
  • Apply a barrier coating before bottom paint
  • Then we apply 2 coats of anti fouling bottom paint while barrier coat is still tacky
  • Pull the tape and the boat is ready to go

Annual recoat for boats that already have bottom paint:

  • Pressure wash off any barnacles / growth off the entire bottom
  • Knock off any loose paint, and sand entire bottom flat and smooth
  • Prime certain areas if needed, and apply two coats of desired bottom paint

Complete redo for boats that have the paint but it has gotten into bad shape:

  • Sodablast off all old the paint down to bare fiberglass and inspect fiberglass for damage (fix any damage as needed)
    This process follows the same procedure as bottom painting a bare hull.

Expect the best results:

We guarantee the best results and work around the clock to give you the finish you deserve, including:

  • A repaint technique that respects the integrity of your boat
  • A completely fresh look and design
  • Precision and detail that delivers the perfect finish


While every boat repaint is individually calculated according to your needs, there are some key things we always consider. We develop the best plan based on:

  • Size
  • Condition 
  • Product & paint requirements
  • Time

That’s it! Our team will quote you based on our industry knowledge and insights, above all else. You won’t be getting a better deal because you won’t find anywhere that will do the best work all while valuing your time and your investment. We keep it simple here. We give you a recommendation and quote that you can trust and the results you’ve been looking for.